Heavy Machinery
2010 Venmeer Trencher
2010 Venmeer Trencher This machine only has a 140 hours, I brought it brand knew, it has always been in a shed, and it is still like brand new. This is a good kept machine and is ready to be put to work.
Open now · 1810 lots / National Equipment, Commercial Truck & Vehicle Auctions
Next to close · Lot 882
2017 FOREST RIVER SANDPIPER 343RSOKCategory · 157 open lots
157 lots · closing soonest first
Heavy Machinery
2010 Venmeer Trencher This machine only has a 140 hours, I brought it brand knew, it has always been in a shed, and it is still like brand new. This is a good kept machine and is ready to be put to work.
Heavy Machinery
2023 Caterpillar 420 Backhoe It has an extendable stick, hydraulic thumb enclosed cab and is 4 wheel drive. Sitting at 120 hrs right now but we still use it so they may go up a little. It comes with a grub spade attachment, 12 in and 24 inch bucket. Located In: Odessa, Texas
Heavy Machinery
2021 VERMEER PD10R Never used in the field. Stored indoors. PD10R042 PD10R PILE DRIVER 20 FT MAST PD10R055 LARGE OPENING HAMMER-225MM PD10R105 LASER RECEIVER-20 MAST PD10R016 MAST POSITION CYLINDERS-ENHANCED PD10R077 HYDRAULIC OIL-HY-POWER 100 PD10RAM002 ~TELEMATICS Includes: PM Planned Maintenance 1000-1999 hours PM Planned Maintenance 2000-2999 hours Warranty -Vermeer Confidence Plus-36 Months, 10000 Hours, Deductible: 0
Heavy Machinery
2020 MECALAC 6MCR EXCAVATOR /LOADER/TOOL CARRIER Current hours on machine: 408 ENGINE: Deutz 75 Horsepower TD2.9 L4 Turbocharged (DOC Converter UNDERCARRIAGE: Central X Frame Chasis Triangular Beams TRACKS: 16 Inch Rubber ( 5.4 Lbs per inch Ground pressure) BACKFILL BLADE: 80 " Width / Lift Height 14.1 " / Max Depth below 13.4" WORKING MODES: Excavator operate machine same way as an excavator Loader operates same way as a compact tracked loader PANORAMIC CAB: Heat/AC/Stereo/Deluxe seat/ Ergonomic Controls TRANSMISSION: 2 Speed Low Range 3.1 MPH /High Range 6.2 MPH QUICK COUPLER CONNECTION: Hook system design / Cylinder applied WEIGHT: 13,480 Pounds ( includes 880 Lb weight kit) No bucket MANUAL CENTRALIZED GREASING REAR CAMERA LENGTH: 9'3" CAB HEIGHT: 9' MAXIMUM DIG DEPTH : 10' 1" 24" HEAVY DUTY BUCKET SKID STEER ADAPTER PLATE 79" HEAVY DUTY SKID BUCKET WITH EDGE MECALAC PALLET FORKS Dual edged grading bucket. Located In: Wayland, Iowa
Heavy Machinery
2016 Komatsu HM 400 9300 hours Located In: Benton, Kentucky
Heavy Machinery
2000 TESMEC TRS1085 Hours: 5,964 Serial Number: 1085-121 Condition: Used Hours Meter: Accurate / Verified Description 2000 Tesmec TRS 1085 Rocksaw Trencher 5964 hours CAT 3306 10.5L diesel engine 325 HP Serial 121 New CAT short block with rebuilt head at 3600 hours Enclosed Cab AC and heat Suspension seat Auto level Cab elevates 4' 6' dig depth 24" cutting width Rock saw teeth Work lights Dirt discharge right or left side 22" single grouser tracks (9) bottom rollers 83,000 lbs base operating weight Serial 1085-121 Located In: Hominy, Oklahoma
Heavy Machinery
2003 Hyster H230HD container lift (23,000 lift capacity ) with 2412 hours on it. It has a tier 1 turbo charged Perkins diesel engine with an extreme cold weather heater package (heaters on the engine oil , transmission, hydraulic oil, and diesel fuel, with either assist start option) which any mechanic can work on because lift is not computer controlled .Heated inclosed hydraulic powered tilt cab with a full suspension seat with fingered tip controls for the hydraulics. The lift has air brakes and a 3 speed forward and reverse transmission. It has 94 inch integral carriage with side shifter and fork positioner. There are brand new 7 foot forks on the lift. The lift has had a full service with in the last 300 hours. In my opinion this is the cleanest 2003 hyster H240HD that you ever come across. The lift is like new and it’s ready to work.
Heavy Machinery
2014 Cat D6T XW Currently 9111 hours but dozer is still in use, engine work at 5k hours, undercarriage work at 6k hours. Trimble GPS CB460 and Trimble base station. Good running and operating dozer and will be used up until it sells. Located in: Mondovi, Wisconsin
Heavy Machinery
2021 John Deere 245G LC FT4 Excavator with Thumb and coupler, 42” Bucket, 9’7” Arm, like new – 372hrs. Located IN: Longmont, Colorado
Heavy Machinery
tooth bucket 84” heavy duty very little wear
Heavy Machinery
This bucket is a 96” high volume light material bucket ( mulch, sawdust )
Heavy Machinery
82” heavy duty bucket
Page 12 of 14